MR108 - Credit form

Form ID

If you already have your Form ID enter the same to pull the saved data, otherwise enter your preferred Form ID which can be used later to pull all your saved data.
TIP: You may use the same Form ID for different credit forms.

Complete the table below for all areas in the building(s). Include historic, abandoned or blighted buildings and exclude structurally unsound and/or hazardous portions from these buildings.

Element	Existing Area {{ unitType }}	Reused Area {{ unitType }}
	{{ row.elementType }}		Other: {{ row.elementTypeOther }}	{{ row.existingArea }}	{{ row.reusedArea }}
Total area {{ unitType }}	{{ d.buildAndMatReuse.buildAreaPath2aTbl.totalExistingArea }}	{{ d.buildAndMatReuse.buildAreaPath2aTbl.totalReusedArea }}
Percent reused (%)		{{ d.buildAndMatReuse.buildAreaPath2aTbl.percentBuildReuse }}

Note: Percent building reuse must be at least 15% for 1 point, 30% for 2 points, 45% for 3 points, 60% for 4 points, 75% for 5 points or 90% for exemplary performance.

Confirm the following:

The project is reusing existing interior nonstructural elements (e.g. interior walls, doors, floor coverings and ceiling systems) in at least 30% (by area) of the completed building, including additions.

Complete the table below for all surface areas in the building(s).

Element	Existing Area {{ unitType }}	Reused Area {{ unitType }}
	{{ row.elementType }}		Other: {{ row.elementTypeOther }}	{{ row.existingArea }}	{{ row.reusedArea }}
Total area {{ unitType }}	{{ d.buildAndMatReuse.buildAreaPath3Tbl.totalExistingArea }}	{{ d.buildAndMatReuse.buildAreaPath3Tbl.totalReusedArea }}
Percent reused (%)		{{ d.buildAndMatReuse.buildAreaPath3Tbl.percentBuildReuse }}

Has the project conducted a life cycle assessment of the project’s structure & enclosure?

Yes

Who conducted the LCA study? Include the authors name, company, title and project role.

Confirm the following:

MEP equipment and controls, fire detection / alarm system fixtures, elevators, conveying systems, excavation, site development, and parking lots have been excluded from the study.

List the service life assumed in the LCA (in years) of the proposed building project:

Has the project conducted a life cycle assessment of the project’s structure & enclosure and compared it against a baseline building and demonstrated reductions?

Yes

List the service life (in years) of the baseline building:

Confirm the following:

The baseline and proposed buildings are of comparable size and function.

The baseline and proposed buildings are of comparable operating energy performance as defined in EA Prerequisite Minimum Energy Performance.

The same LCA software / tool and ISO 14044 –compliant data set is used to study both the baseline building and the proposed building. If using a dataset other than one for the specific project location, describe why the data set was selected as a proxy.

Table: Life-cycle assessment impact measures (Complete the table below for all six impact categories for the baseline building and proposed building (as appropriate).

	Proposed Building Value	Percent Reduction (%)
Global warming potential GHG	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.globWarming.baseBuildVal }}	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.globWarming.propBuildVal }}	kg CO₂e	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.globWarming.percentReduc }}
Stratospheric ozone depletion	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.ozoneDeplet.baseBuildVal }}	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.ozoneDeplet.propBuildVal }}	kg CFC-11e	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.ozoneDeplet.percentReduc }}
Acidification of land and water	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.acidiofLandWater.baseBuildVal }}	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.acidiofLandWater.propBuildVal }}	moles H+ kg SO₂e	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.acidiofLandWater.percentReduc }}
Eutrophication	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.eutrophication.baseBuildVal }}	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.eutrophication.propBuildVal }}	kg N kg PO₄	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.eutrophication.percentReduc }}
Tropospheric ozone formation	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.tropoOzoneForm.baseBuildVal }}	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.tropoOzoneForm.propBuildVal }}	kg NOx kg O₃ kg C₂H₄	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.tropoOzoneForm.percentReduc }}
Depletion of non-renewable energy resources	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.depletEnrgyResrc.baseBuildVal }}	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.depletEnrgyResrc.propBuildVal }}	MJ	{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.depletEnrgyResrc.percentReduc }}
Number of measures with at least a 5% reduction		{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.numberMeasure5 }}
Number of measures with at least a 10% reduction		{{ d.buildLifeCyclAsesmnt.lifeCycleTbl.numberMeasure10 }}

Notes:

Proposed building values must not exceed baseline building values by 5% in any category.
Report impacts per square foot or per square meter rounded to the nearest 10^-4 for all six impact categories.
Exemplary Performance: achieve Path 4 and reduce GWP by 40% or more.

Path 4 only:

Describe the structural and/or enclosure system building reuse elements incorporated into the project. Include systems or materials reused in-place, materials reused from other parts of the building, or offsite reuse (salvaged materials) incorporated into the structure and/or enclosure. Describe how the impacts from reuse were included in the LCA study and list the proportion of reduction(s) due to reuse strategies.

Path 2-4: Design Optimizations

List the optimization strategies made to the project design (by design element category) that resulted in reductions to GWP, as applicable.

Design Element	GWP Reduction (kg CO₂e)
Above grade structure (superstructure)	{{ d.buildLifeCyclAsesmnt.designOptimizations.aboveGrade.summary }}	{{ d.buildLifeCyclAsesmnt.designOptimizations.aboveGrade.reduction }}
Foundations	{{ d.buildLifeCyclAsesmnt.designOptimizations.foundations.summary }}	{{ d.buildLifeCyclAsesmnt.designOptimizations.foundations.reduction }}
Wall assembly	{{ d.buildLifeCyclAsesmnt.designOptimizations.wallAssembly.summary }}	{{ d.buildLifeCyclAsesmnt.designOptimizations.wallAssembly.reduction }}
Roof assembly	{{ d.buildLifeCyclAsesmnt.designOptimizations.roofAssembly.summary }}	{{ d.buildLifeCyclAsesmnt.designOptimizations.roofAssembly.reduction }}
Other	{{ d.buildLifeCyclAsesmnt.designOptimizations.otherElement.summary }}	{{ d.buildLifeCyclAsesmnt.designOptimizations.otherElement.reduction }}

For all Paths:

Upload the LCA report (PDF, Word, Excel or JPG file) including the summary page from the life-cycle assessment tool stating, at a minimum, the impact category values for both the baseline and proposed buildings: global warming potential GHG (greenhouse gases), stratospheric ozone depletion, acidification of land and water, eutrophication, tropospheric ozone formation, and depletion of non-renewable energy resources.

Special Circumstances

Describe the circumstances limiting the project team's ability to provide the submittals required in this form. Be sure to reference what additional documentation has been provided, if any. Non-standard documentation will be considered upon its merits. (Optional)

Upload any additional documentation that supports the claim to special circumstances. (Optional)