EA104 - Credit form

Select one of the following:

Option 1. Energy Performance Compliance.

ASHRAE/IESNA Standard 90.1-2016 Appendix G Performance Rating Method {{ pointsOption1 }}

Option 2. Prescriptive compliance: ASHRAE Advanced Energy Design Guide {{ pointsOption2 }}

Option 3. Systems Optimization {{ pointsOption3 }}

Option 4. Data Centers only - Systems Optimization (1-3 points)

Upload the efficiency measures that were analyzed during the design process, and what analysis method was used, and describe how these results were accounted for in decision making.

Option 1. Energy Performance Compliance.

Select one of the option:

Upload Target Finder performance results.

Provide the Target Finder performance results for the project building (a screen capture or other documentation containing the same information).

The project is unable to use Target Finder.

Energy Performance Compliance Results:

Points are calculated as follows:

Table 1. Points for percentage improvement in energy performance – % Cost PCI below PCI_T

New Construction	Healthcare, Major Renovation, CS	Points
5%	2%	1
10%	5%	2
15%	10%	3
20%	15%	4
25%	20%	5
30%	25%	6
35%	30%	7
40%	35%	8	8	-
45%	40%	9	9	8
50%	45%	EP	10	EP
-	50%	-	EP	-

Table 2. Points for percentage improvement in energy performance – % Greenhouse Gas Emissions PCI below PCI_T

New Construction	Healthcare, Major Renovation, CS	Points
5%	2%	1
10%	5%	2
16%	10%	3
24%	16%	4
32%	24%	5
40%	32%	6
50%	40%	7
65%	50%	8	8	-
80%	65%	9	9	8
100%	80%	EP	10	EP
-	100%	-	EP	-

Provide the following values from the Minimum Energy Performance Calculator or supplemental summary documents uploaded in EAp: Minimum Energy Performance:

Total proposed site energy {{ (d.unitTypeSelected == 'SI')?'(kWh/year)':'(Btu x 10⁶/year)' }}

Total proposed annual energy cost ($/year)

Total percent cost PCI below PCI_T (%)

Total proposed greenhouse gas emissions (MTCO2e/year)

Total percent greenhouse gas emissions PCI below PCI_T (%)

Option 2. Prescriptive compliance.

Project climate zone number

Select one. Choose the appropriate AEDG for the project type:

ASHRAE 50% Advanced Energy Design Guide for Small to Medium Office Buildings

ASHRAE 50% Advanced Energy Design Guide for Medium to Large Box Retail Buildings

ASHRAE 50% Advanced Energy Design Guide for K-12 School Buildings

ASHRAE 50% Advanced Energy Design Guide for Large Hospitals

ASHRAE 50% Advanced Energy Design Guide for Grocery Stores

Provide the completed AEDG Tables (found under the prerequisite’s “Resources” tab in the Credit Library). Complete appropriate categories under HVAC and, if applicable, all additional sections being pursued, as indicated below.

Option 3. Systems Optimization

Select all that apply. Indicate which strategies are being pursued from the list of building systems below. Each strategy selected earns 1 point, up to a maximum of 6 points.

Interior and Exterior Lighting

Daylight Controls

Building Envelope

HVAC and Service Water Heating Equipment Efficiency

Equipment and Appliances

Interior and Exterior Lighting Systems

Lighting Power Density

Select one of the following. Lighting power density is calculated by the following method:

Using the space-by-space approach

Applying the whole building lighting power density allowance to the tenant space.

The lighting power allowance calculation is consistent with ASHRAE 90.1-2016 requirements. Proposed lighting system power includes all lighting system components shown or provided for on the plans (including lamps and ballasts and task and furniture-mounted fixtures, except when specifically excepted in ASHRAE 90.1-2016 Section 9. The track lighting calculation is consistent with Section 9.1.4 and does not use the specified wattage of the luminaires initially installed on the track.

Table: Lighting Power Allowance

Building Area (9.5.1) or Space Type (9.6.1)	Table 9.5.1 or Table 9.6.1 Allowed LPD {{ unitLPD }}	Gross Area {{ unitType }}	Lighting Power Allowance (W)	Installed Interior Lighting Power (W)
	{{ row.spaceType }}		{{ row.allowedLPD }}		{{ row.grossArea }}	{{ row.lightingPowerAllow }}		{{ row.installedInterLightPwr }}
Total		{{ d.systemOptimization.lightingPowerDensity.lightPowerAllowTbl.totGrossArea }}	{{ d.systemOptimization.lightingPowerDensity.lightPowerAllowTbl.totalPowerAllow }}	{{ d.systemOptimization.lightingPowerDensity.lightPowerAllowTbl.totalInterPowerAllow }}

Table: Additional lighting power allowance (Optional)

Special Lighting Space Type	Gross Area {{ unitType }}	Additional LPD Allowance {{ unitLPD }}	Additional Lighting Power Allowance (W)	Installed Additional Interior Lighting Power (W)
	{{ row.spLightSpaceType }}		{{ row.grossArea }}	{{ row.additLPDallowed }}	{{ row.additLightPowerAllowed }}		{{ row.installAdditInterLightPwr }}
Total			{{ d.systemOptimization.lightingPowerDensity.additLightPowerAllowTbl.totalAdditPowerAllow }}	{{ d.systemOptimization.lightingPowerDensity.additLightPowerAllowTbl.totalAdditInterPowerAllow }}

Table: Additional control method (Optional)

Additional Control Method (from 90.1 Table 9.6.2)	Space Type	Control Factor	Lighting Power Under Control (W)	Additional Lighting Power Allowance (W)
	{{ row.additControlMethod }}		{{ row.spaceType }}		{{ row.controlFactor }}		{{ row.lightPwrUnderControl }}	{{ row.additLightPowerAllowed }}
Total				{{ d.systemOptimization.lightingPowerDensity.additControlMethodTbl.totalAdditLightPowerAllow }}

Table: Lighting power summary

	Energy Code Allowance (W)	Installed (W)
General lighting power allowance	{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.greenLightPwrAllow.energyCode }}	{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.greenLightPwrAllow.installedW }}
Additional lighting power - decorative/retail	{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.additLightPwrDecoRetail.energyCode }}	{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.additLightPwrDecoRetail.installedW }}
Additional control method lighting power allowance	{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.additCntrlMthdLightPwr.energyCode }}
Total	{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.allTotal.energyCode }}	{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.allTotal.installedW }}
Percent lighting power reduction achieved (%)		{{ d.systemOptimization.lightingPowerDensity.lightPowerSummary.percentPwrReduction }}

Note: Must be at least 5% for prerequisite compliance, 15% for 1 point, 30% for 2 points and 45% for 3 points.

Indicate the project’s lighting power reduction(s):

15% lighting power reduction

30% lighting power reduction

45% lighting power reduction

Daylight Controls

Daylight-responsive controls are installed for a given percentage of connected lighting load.

Table: Lighting controls

Space Type	Sensor Type	Load with Occupancy Sensors (W)
	{{ row.spaceType }}	{{ row.sensorType }}	{{ row.daylightSensorsLoad }}	{{ row.occupancySensorsLoad }}
Total load with daylight controls (W)		{{ d.systemOptimization.daylightingControls.lightControlsTbl.totDaylightControls }}
Total load with occupancy controls (W)		{{ d.systemOptimization.daylightingControls.lightControlsTbl.totalOccControls }}
Total connected light load (W)		{{ d.systemOptimization.daylightingControls.lightControlsTbl.totalConnectedLoad }}
Percent connected load covered by daylight controls (%)¹		{{ d.systemOptimization.daylightingControls.lightControlsTbl.percentDaylightControls }}
Percent connected load covered by occupancy controls (%)²		{{ d.systemOptimization.daylightingControls.lightControlsTbl.percentOccuControls }}

The project's percentage of connected lighting load with daylight-responsive controls is at least 40%.

Building Envelope

Climate Zones 1 – 2: Achieve 2 of the 3 strategies below for 1 point.

Thermal Mass Enclosure: More than 50% of opaque above-grade wall area meets ASHRAE 90.1-2016 definition for “mass wall”; and more than 50% of floor area meets ASHRAE 90.1-2016 definition for “mass floor”.

25% envelope UA reduction beyond ASHRAE 90.1-2016 prescriptive envelope requirements

50% SHGC reduction (including window shade factors)

Climate Zones 3 – 8: Achieve 2 of the 3 strategies below for 1 point.

25% envelope UA reduction beyond ASHRAE 90.1-2016 prescriptive envelope requirements

50% envelope UA reduction beyond ASHRAE 90.1-2016 prescriptive envelope requirements

25% reduction in air infiltration measured during commissioning

Upload a narrative and calculations demonstrating achievement of each building envelope systems optimization requirement pursued.

HVAC and Service Water Heating Equipment Efficiency

Reductions in Total Fan Power Allowance:

20% reduction in total fan power allowance beyond ASHRAE/IESNA Standard 90.1-2016 prescriptive requirements.

Improvement in Equipment Efficiency:

20% improvement in efficiency for at least 75% of the combined cooling, heating, and service water heating capacity beyond ASHRAE/IESNA Standard 90.1-2016 prescriptive requirements

Upload a narrative and calculations demonstrating achievement of each HVAC systems optimization requirement pursued.

Equipment and Appliances

ENERGY STAR equipment including appliances, office equipment, electronics, and commercial food service equipment as applicable are installed in the project.

Commercial kitchen and refrigeration equipment meeting the requirements listed in Appendix 3, Table 1 are installed in the project.

The project scope of work includes at least 0.25 Watts per square foot of eligible equipment.

Table: ENERGY STAR equipment

Complete the table below for all ENERGY STAR eligible products, and commercial kitchen and refrigeration equipment listed in Appendix 3 Table 1 installed as part of the project scope of work.

Non-ENERGY STAR Equipment				ENERGY STAR Equipment				Total (W)
Category	Number	Rated Power (W)	Subtotal (W)	Make and Model	Number	Rated Power (W)	Subtotal (W)	Total (W)
	{{ row.nonEnergyCategory }}		{{ row.nonEnergyNumber }}		{{ row.nonEnergyRatedPower }}	{{ row.nonEnergySubTotal }}		{{ row.energyMakeModel }}	{{ row.energyNumber }}	{{ row.energyRatedPower }}	{{ row.energySubTotal }}	{{ row.totalW }}
Total			{{ d.systemOptimization.equipmentNAppliances.energyStarTbl.sumOfSubtotal1 }}				{{ d.systemOptimization.equipmentNAppliances.energyStarTbl.sumOfSubtotal2 }}	{{ d.systemOptimization.equipmentNAppliances.energyStarTbl.allTotals }}
Percent ENERGY STAR rated equipment (%) ¹								{{ d.systemOptimization.equipmentNAppliances.energyStarTbl.percentEnergyStar }}

Notes:
1 Must be 75% for one point

Option 4. Data Centers only - Systems Optimization

The project has calculated an Overall Systems Design Value as the sum of the maximum design Mechanical Load Component (MLC) and maximum design Electrical Load Component (ELC) in accordance with ASHRAE 90.4-2016 Section 6.2, Section 8.2 and Section 11.

Select one of the following: The Overall Systems Design value is less than the Maximum Overall Systems Value by:

10% (1 point)

20% (2 points)

30% (3 points)

Collocated data centers only - Select one of the following: The Overall Systems Design value is less than the Maximum Overall Systems Value by:

6% (1 point)

12% (2 points)

18% (3 points)

Upload ASHRAE 90.4 calculations, consistent with documentation requirements listed in ASHRAE 90.4.

Special Circumstances

Describe the circumstances limiting the project team's ability to provide the submittals required in this form. Be sure to reference what additional documentation has been provided, if any. Non-standard documentation will be considered upon its merits. (Optional)

Upload any additional documentation that supports the claim to special circumstances. (Optional)

New Construction	Healthcare, Major Renovation, CS	Points
5%	2%	1
10%	5%	2
15%	10%	3
20%	15%	4
25%	20%	5
30%	25%	6
35%	30%	7
40%	35%	8	8	-
45%	40%	9	9	8
50%	45%	EP	10	EP
-	50%	-	EP	-

New Construction	Healthcare, Major Renovation, CS	Points
5%	2%	1
10%	5%	2
15%	10%	3
20%	15%	4
25%	20%	5
30%	25%	6
35%	30%	7
40%	35%	8	8	-
45%	40%	9	9	8
50%	45%	EP	10	EP
-	50%	-	EP	-

New Construction	Healthcare, Major Renovation, CS	Points
5%	2%	1
10%	5%	2
15%	10%	3
20%	15%	4
25%	20%	5
30%	25%	6
35%	30%	7
40%	35%	8	8	-
45%	40%	9	9	8
50%	45%	EP	10	EP
-	50%	-	EP	-